This hard phone is another ATA (analog telephone adaptor). It enables you to connect your POTS (plain old telephone system) phones to the Internet. Think of it as a phone jack for VoIP. It has one ethernet port and two RJ11 phone jacks. This is one of the most feature rich and easy to use ATA that we have tested. Out of the box, it is configured for DHCP. This means that it gets its IP address from your DHCP server automatically. Full documentation can be found at Sipura's site.
NOTE: We have seen instances where installing the SPA-2002 behind a firewall which blocks ICMP packets causes problems with registration. Try turning off any ICMP blocking on your firewall.
You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and
dial: **** (four asterisks)
then dial: 110 #
and you will be told the IP address of your device
(e.g. 192.168.0.100) |